The instrument is used for measuring/controlling the pH, ORP or NH3 (ammonia) concentration.
The function is switchable on the instrument itself. Depending on the measured variable,
combination electrodes (e. g. pH/redox combination electrodes, gas-sensitive sensors) or split
versions (glass/metal electrodes with a separate reference elect
The instrument is used for measuring/controlling the pH, ORP or NH3 (ammonia) concentration.
The function is switchable on the instrument itself. Depending on the measured variable,
combination electrodes (e. g. pH/redox combination electrodes, gas-sensitive sensors) or split
versions (glass/metal electrodes with a separate reference electrode) can be readily connected.
Temperature serves as the second input variable, measured by a Pt100/1000, for example. It is
therefore possible to implement automatic temperature compensation for the pH and NH3
variables
Electronet series PH-100S are PH / ORP Transmitters used for various industrial applications.
It can accept input from pH / ORP electrode and pH / ORP signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line pH / ORP indication is provided through LCD. Span / Zero adjustments are easily accessible. These transmitters are suitable for any make of electrode.
Electronet Series UAC - 100 is dual input analyzer with single or dual sensor input. This analyzer supports wide range of measurement choices in industrial applications. It can accept pH / Conductivity / ORP / DO sensor input in any combination. The high-contrast LCD with back-lit provides live measurement readouts in large digits and sh
Electronet Series UAC - 100 is dual input analyzer with single or dual sensor input. This analyzer supports wide range of measurement choices in industrial applications. It can accept pH / Conductivity / ORP / DO sensor input in any combination. The high-contrast LCD with back-lit provides live measurement readouts in large digits and shows upto four additional process variables.
CURRENT OUTPUTS:
Two 4-20 mA current outputs are electrically isolated. Outputs are fully scalable and can be programmed to linear. Output damping can be enabled with time duration from 0 to 50 seconds.
The instrument is used for the conductive measurement/control of electrolytic conductivity,
resistivity or the TDS value. In addition, the JUMO AQUIS 500 CR also offers the possibility of
showing the measured conductivity according to a customer-specific table.
Conductive two-electrode cells as well as four-electrode cells can be connected
The instrument is used for the conductive measurement/control of electrolytic conductivity,
resistivity or the TDS value. In addition, the JUMO AQUIS 500 CR also offers the possibility of
showing the measured conductivity according to a customer-specific table.
Conductive two-electrode cells as well as four-electrode cells can be connected to the
instrument.
Temperature serves as the second input variable, measured by a Pt100/1000 probe. Depending
on the measured variable, it is therefore possible to implement specific, automatic temperature
compensation.
Electronet series CT / TDS Transmitter CT-TX-22 are designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and sur
Electronet series CT / TDS Transmitter CT-TX-22 are designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensures the long life and require low maintenance.
Electronet series DO-100S are dissolved oxygen transmitters used for various industrial applications. It can accept input from DO electrode the signal is transmitted in the form of electrical 4 - 20 mA signal. The online indication is provided through LCD. Span/Zero adjustments are easily accessible.
Copyright © 2025 Darter Technologies - All Rights Reserved.
Powered by GoDaddy
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.