water quality analysers

  The instrument is used for measuring/controlling the pH, ORP or NH3 (ammonia) concentration.

The function is switchable on the instrument itself. Depending on the measured variable,

combination electrodes (e. g. pH/redox combination electrodes, gas-sensitive sensors) or split

versions (glass/metal electrodes with a separate reference electrode) can be readily connected.

Temperature serves as the second input variable, measured by a Pt100/1000, for example. It is

therefore possible to implement automatic temperature compensation for the pH and NH3

variables 

Electronet Series UAC - 100 is dual input analyzer with single or dual sensor input. This analyzer supports wide range of measurement choices in industrial applications. It can accept pH / Conductivity / ORP / DO sensor input in any combination. The high-contrast LCD with back-lit provides live measurement readouts in large digits and shows upto four additional process variables.

CURRENT OUTPUTS:

Two 4-20 mA current outputs are electrically isolated. Outputs are fully scalable and can be programmed to linear. Output damping can be enabled with time duration from 0 to 50 seconds.

 The instrument is used for the conductive measurement/control of electrolytic conductivity,

resistivity or the TDS value. In addition, the JUMO AQUIS 500 CR also offers the possibility of

showing the measured conductivity according to a customer-specific table.

Conductive two-electrode cells as well as four-electrode cells can be connected to the

instrument.

Temperature serves as the second input variable, measured by a Pt100/1000 probe. Depending

on the measured variable, it is therefore possible to implement specific, automatic temperature

compensation.

 Electronet series CT / TDS Transmitter CT-TX-22 are designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensures the long life and require low maintenance.